Rentable vs. usable square feet, and what the load costs you.

Convert usable square feet to rentable (or rentable back to usable) with a load factor written either way, 1.15 or 15%. Add the rent per square foot to see annual and monthly rent and how much of it pays for common area. Or enter a building's totals to find its load factor.

  • Free, no signup
  • Runs in your browser; nothing you type is sent to TenantPoint
  • Download the result as a CSV or print it

Rentable vs. usable square feet

Convert usable and rentable square feet

The numbers update as you type.

You're looking at a worked example. Replace any number with your own.

Step 1: What you know
What do you want to work out?
Which square footage do you have?

Floor plans and space plans usually show usable area. Listings, LOIs, and leases usually quote rentable area.

The space inside your suite that you actually occupy.

Step 2: The load factor
How is the load quoted?

"1.15 load factor" and "15% load" mean the same thing. Pick the one that matches what you were given.

Rentable ÷ usable. Usually between 1.00 and 1.25 for multi-tenant office.

Step 3: Rent (optional)

Adds annual and monthly rent, and how much of it pays for common area.

Rentable square feet

2,300 SF

2,000 usable SF at a load factor of 1.15 (15% add-on) is 2,300 rentable SF. 300 SF of that is your share of common areas. At $28.00 per rentable SF, rent is $5,366.67 a month.

Usable square feet2,000 SFAs entered
Common-area share300 SF15% added to usable
Annual rent$64,400$5,366.67 a month
Rent on common area$8,400/yr13.04% of the rent, $700.00/mo
Effective rent per usable SF$32.20/yrUse this to compare two spaces

An estimate. Square feet are rounded to whole numbers. The lease, and the measurement standard it names, decide the rentable area that rent is charged on.

How we got this number
  1. Rentable square feet2,000 usable SF × 1.152,300 SF
  2. Common-area share2,300 rentable − 2,000 usable300 SF
  3. Annual rent2,300 rentable SF × $28.00$64,400.00
  4. Monthly rent$64,400.00 ÷ 12$5,366.67
  5. Rent on common area300 SF × $28.00$8,400.00
  6. Effective rent per usable SF$64,400.00 ÷ 2,000 usable SF$32.20/yr

What is a load factor?

Two measurements of the same space, and the ratio between them.

In a multi-tenant building, some floor area belongs to no single tenant: the lobby, shared corridors, restrooms, elevator lobbies, and mechanical and electrical rooms. Landlords recover the cost of that space by spreading it across the tenants. The load factor is how they do it.

  • Usable square feet (USF) is the area inside your suite that you occupy.
  • Rentable square feet (RSF) is your usable area plus your share of the common areas.
  • Load factor = RSF ÷ USF. A load factor of 1.15 means every usable square foot comes with 0.15 square feet of common area.
  • Add-on factor = load factor − 1, written as a percent. A 1.15 load factor is a 15% add-on, which many brokers call a “15% load.”

In the US, office space is usually measured under the BOMA office standard, published by the Building Owners and Managers Association as ANSI/BOMA Z65.1. It defines how to measure usable and rentable area and how to allocate common areas to tenants. It has been revised several times, and the editions do not all measure the same way, so the same building can produce different rentable figures depending on which edition the lease names. BOMA publishes separate standards for retail, industrial, and other property types.

The same load written three ways
Written asMeans2,000 usable SF becomes
1.15 load factorRentable ÷ usable = 1.152,300 rentable SF
15% load, or 15% add-onRentable is 15% more than usable2,300 rentable SF
13% loss (core) factorCommon area is 13% of rentable2,300 rentable SF

Typical load factors by property type.

Rough ranges, not rules. The building's measurement report is the only number that counts.

Typical add-on factors by property type (rough ranges)
Property typeTypical add-onLoad factorWhy
Multi-tenant office, partial floorAbout 10% to 20%1.10 to 1.20Shares floor corridors, restrooms, and the building lobby
Office, full floorOften lower than a partial floorVariesFloor corridors count as the tenant's own usable area
Medical officeSimilar to office, sometimes higherVariesLarger shared waiting and service areas in some buildings
Shopping center retailOften none1.00Rent on leasable area; parking and walks recovered through CAM
Single-tenant industrialUsually none1.00The tenant uses the whole building
Multi-tenant flex or industrialSmall, if any1.00 to about 1.05Only where there are shared lobbies or restrooms

Older buildings with grand lobbies and wide corridors tend to run higher loads. So do buildings that have added shared amenities such as a fitness room, conference center, or tenant lounge, since those areas are usually spread across the tenants too.

A worked example: usable to rentable to rent.

A 2,000 usable square foot office suite, quoted at a 1.15 load factor and $28 per rentable square foot per year.

  1. Rentable square feet = 2,000 USF × 1.15 = 2,300 RSF.
  2. Common-area share = 2,300 − 2,000 = 300 SF.
  3. Annual rent = 2,300 RSF × $28 = $64,400, or $5,366.67 a month.
  4. Rent on common area = 300 SF × $28 = $8,400 a year, about 13% of the rent.
  5. Effective rent per usable SF = $64,400 ÷ 2,000 USF = $32.20, which is $28 × 1.15.

Going the other way: if a listing quotes 2,300 rentable square feet at a 15% load, the usable area is 2,300 ÷ 1.15 = 2,000 square feet. That is the number to give your space planner, because it is the space you can actually put furniture in.

For a whole building, divide total rentable area by total usable area. A building with 50,000 rentable square feet and 43,000 usable square feet has a load factor of 50,000 ÷ 43,000 = 1.1628, a 16.28% add-on. Its 7,000 square feet of common area is 14% of the rentable area.

How load factor affects rent, CAM, and comparing spaces.

Rent. Base rent is charged on rentable square feet, so a higher load raises the rent for the same usable space. The rent per rentable square foot doesn’t show this; the total does.

CAM and operating costs. Most leases set the tenant’s pro-rata share of operating costs as its rentable area divided by the building’s rentable area. If every tenant carries the same load, the load cancels out of that share. If the landlord remeasures and your rentable area grows while others don’t, your share of taxes, insurance, and CAM grows with it. The pro-rata share calculator works out that percentage, and the triple-net lease guide covers how those charges are billed and reconciled.

Comparing two spaces. Convert each quote to rent per usable square foot: annual rent ÷ usable square feet, or simply the quoted rate × the load factor. A lower headline rate can cost more:

Two 2,000 usable SF suites with different loads
Quoted rateLoad factorRentable SFAnnual rentPer usable SF
Space A$30.001.122,240$67,200$33.60
Space B$28.001.222,440$68,320$34.16

Space B looks $2 cheaper per square foot but costs $1,120 more a year for the same usable space. Once you have the rentable area, the commercial lease calculator adds NNN charges, yearly increases, and free rent to show the full cost of each offer.

Questions to ask, and terms to negotiate.

The load is set by the building, but how it is stated in the lease is negotiable.

  • Which measurement standard and edition? Ask which BOMA edition (or other standard) the building was measured under, and for the measurement report or a floor plan showing the usable area.
  • Is the load the same on every floor? Some methods give each floor its own load; others spread one building-wide load across everyone.
  • Can the landlord remeasure? Look for a remeasurement clause. Tenants often ask that the rentable area be fixed for the term, or that remeasurement can’t raise rent or operating cost shares.
  • Cap the load factor. A clause that the load will not exceed a stated figure (for example, 1.15) protects against a higher number showing up when the space is measured.
  • Verify the usable area. A tenant can hire an architect or measurement firm to check the usable area before signing. A small error on a long lease adds up.
  • Owners: state both numbers. Putting usable area, rentable area, load factor, and the standard in the lease prevents most disputes later.

After you sign: each tenant’s rentable area drives its rent and its share of every CAM, tax, and insurance bill. TenantPoint keeps the square footage, the lease’s stated pro-rata share, and rent steps in one record per lease, and warns before you approve a year-end reconciliation when the share it calculates differs from the lease’s.

Free template

Get the CAM reconciliation worksheet

The spreadsheet version: recoverable pool, each tenant's share, caps, proration, admin fee and the true-up balance. Comes with the reconciliation and audit checklists.

  • CAM reconciliation worksheetSpreadsheet template
  • CAM Reconciliation ChecklistPrintable checklist
  • CAM Audit Checklist for Landlords and TenantsPrintable checklist

Free. We email you the links; no mailing list unless you tick the box. Privacy policy

How to use the Load factor calculator

  1. Choose what you know

    Usable square feet from a floor plan, or rentable square feet from a listing or lease. Or switch to building mode.

  2. Enter the load factor

    As a ratio (1.15) or an add-on percent (15%). Either works; the calculator says how it read your entry.

  3. Add the rent if you like

    The rate per rentable square foot shows annual and monthly rent, rent on common area, and rent per usable square foot.

What this calculator covers, and what it doesn’t.

Included

Both directions, both conventions

Usable to rentable and back, load factor or add-on percent, a building's load from its totals, and rent on the common-area share.

Not included

Measuring the space

It doesn't measure floor plans or apply BOMA's allocation rules floor by floor. It uses the load factor you enter, or the building totals you have.

Best use

Check a quote, compare two

Turn a listing's rentable area into usable space you can plan around, and compare two buildings on rent per usable square foot.

How this is calculated.

Steps

  1. Load factor = rentable square feet ÷ usable square feet.
  2. Add-on factor = (load factor − 1) × 100. A 15% add-on is a 1.15 load factor.
  3. Rentable SF = usable SF × load factor; usable SF = rentable SF ÷ load factor. Converted areas are rounded to whole square feet.
  4. Common-area share = rentable SF − usable SF. Common area as a share of rentable = common area ÷ rentable SF.
  5. Annual rent = rentable SF × rate per rentable SF per year; monthly rent = annual ÷ 12.
  6. Rent on common area = common-area share × rate. Effective rent per usable SF = annual rent ÷ usable SF.

What it leaves out

  • BOMA floor-by-floor allocation and measurement rules.
  • Differences between BOMA editions or other measurement standards.
  • NNN, CAM, and other charges on top of base rent.
  • Escalations, free rent, and other lease terms.

Method checked . General information for commercial property owners, not legal, tax, or accounting advice. The signed lease controls.

Load factor questions, answered.

What is a good load factor?

There is no single good number, because it depends on the building. For multi-tenant office space, add-on factors of roughly 10% to 20% (load factors of 1.10 to 1.20) are common. A tenant that takes a whole floor often sees a lower load, because the corridors on that floor become part of its usable area. Older buildings with large lobbies, and newer ones with big amenity spaces, can run higher. Retail and industrial space often has little or no load. A lower load is better for the tenant only if the rent per square foot is comparable, so compare spaces on rent per usable square foot.

How do you calculate load factor?

Divide rentable square feet by usable square feet. A floor with 11,500 rentable square feet and 10,000 usable square feet has a load factor of 11,500 ÷ 10,000 = 1.15. Subtract 1 and multiply by 100 to get the add-on factor: 15%. To go from a tenant's usable area to rentable area, multiply usable square feet by the load factor. To go back, divide rentable square feet by the load factor.

What's the difference between rentable and usable square feet?

Usable square feet is the area inside your suite that you occupy: your offices, open work area, and private rooms. Rentable square feet is usable area plus your share of the building's common areas, such as the lobby, shared corridors, restrooms, and mechanical rooms that serve the floor or building. Rentable is always equal to or larger than usable. The gap between them is the load.

Do I pay rent on rentable or usable square feet?

In most multi-tenant office leases, rent is charged on rentable square feet. That means part of every rent check pays for your share of common areas. With a 15% add-on, about 13% of the rent covers common area. The lease's premises section states the rentable area, and often the usable area and the measurement standard as well. Retail and industrial leases usually quote a single leasable area instead.

What is a 15% load factor?

A 15% load factor means rentable area is 15% larger than usable area, the same as a load factor of 1.15. On a 2,000 usable square foot suite, you pay rent on 2,000 × 1.15 = 2,300 rentable square feet. The extra 300 square feet is your share of common areas. Some brokers write this as "15% load," others as "1.15 load factor"; they mean the same thing.

Does load factor apply to retail?

Usually not in the same way. Most shopping center and street retail leases quote rent on gross leasable area (GLA), measured to the outside of the tenant's walls, with no add-on for common areas. The tenant pays for parking lots, sidewalks, and other shared areas through CAM charges instead. Some enclosed malls and mixed-use buildings do apply a load, so check how the lease defines the premises.

Does load factor apply to industrial space?

A single-tenant industrial building is usually leased by its full building area with no load, because the tenant uses all of it. Multi-tenant industrial and flex buildings sometimes add a small share of shared areas such as a common lobby or restrooms. BOMA publishes a separate measurement standard for industrial buildings, and the lease should say which method it uses.

Can the load factor change during my lease?

It can if the lease allows the landlord to remeasure the building, for example after a renovation or when moving to a newer edition of the BOMA standard. A remeasurement can raise your rentable area, and with it your rent and your pro-rata share of operating costs, without any change to your space. Tenants often negotiate a fixed rentable area for the term, or a clause that rent won't rise because of remeasurement.

What is the difference between load factor and loss factor?

Load factor (or add-on factor) compares common area to usable area: rentable ÷ usable. Loss factor, sometimes called the core factor, compares common area to rentable area: (rentable − usable) ÷ rentable. The same space with a 15% add-on factor has a loss factor of about 13%. Ask which one a broker means before comparing two buildings.

General information for commercial property owners, not legal, tax, or accounting advice. The signed lease controls.

Cite or link to this tool.

Free to use and to reference in a guide, newsletter, client email or lease review. Click a box to select it, then copy.

Citation

TenantPoint. Load factor calculator [Online tool]. https://tenantpoint.co/tools/load-factor-calculator

HTML link

<a href="https://tenantpoint.co/tools/load-factor-calculator">Load factor calculator</a> by TenantPoint

When the spreadsheet stops being enough

Keep every tenant’s square footage and share in one place.

TenantPoint keeps leases, rent, CAM, and tenant records in one workspace for owner-operators. No credit card required to start.